(JK-H01A top housing install)
(6) Move the two support arms inside. Fig-2
(7) Remove knockout in the center of the housing
(8) Put the video cable, power cable, and the
(9) Insert the camera housing into the ceiling. Push
(10) Tighten the two support arm screws to secure
Downloaded from
www.Manualslib.com
and let the cable pass through.
communication cable inside the housing from
the hole on the topside.
out the support arms so that they hold onto the
ceiling. Fig-3
the camera housing to the ceiling. Fig-4
manuals search engine
Lock
screw
Support
Arms
Support wire
is fixed here
Support Arms
- 35 -
Lock
screw
Fig-2
Fig-3
Fig-4