Toshiba DF03A - IK CCTV Camera Instruction Manual page 22

To enable AUTO PATROL:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to AUTO PATROL and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to scroll through the presets. Move the joystick left or right to turn
the preset ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.7 SCAN SPEED
The SCAN SPEED for auto scan, random scan and frame scan can be set from 1-90 degrees/sec.
However, this speed is limited by MAX SPEED setting.
Menu
To set SCAN SPEED:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to SCAN SPEED and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to set the speed.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
Downloaded from www.Manualslib.com
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
manuals search engine
PAN/TILT MENU
AUTO FLIP
PROPORTIONALP/T
SCAN LIMIT STOPS
MANUAL LIMIT STOPS OFF
PARK TIME MIN
AUTO PATROL P1 OFF
SCAN SPEED
SCAN TILT ANGLE 30DEG.
STOP TIME
MAX SPEED
- 22 -
ON
ON
OFF
0MIN
5DEG./S
10SEC
400DEG/S