Toshiba DF03A - IK CCTV Camera Instruction Manual page 24

To set STOP TIME:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to STOP TIME and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to set the stop time.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.10 MAX SPEED
The maximum speed of Pan/Tilt functions can be set from 30 degrees/sec to 400 degrees/sec. The
max speed controls global Pan/Tilt speeds. To reduce rotation noise use a lower speed.
Menu
To set MAX SPEED:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to MAX SPEED and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to set the maximum speed.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
Downloaded from www.Manualslib.com
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
manuals search engine
PAN/TILT MENU
AUTO FLIP
PROPORTIONALP/T
SCAN LIMIT STOPS
MANUAL LIMIT STOPS OFF
PARK TIME MIN
AUTO PATROL P1 OFF
SCAN SPEED
SCAN TILT ANGLE 30DEG.
STOP TIME
MAX SPEED
- 24 -
ON
ON
OFF
0MIN
5DEG./S
10SEC
400DEG/S