Toshiba DF03A - IK CCTV Camera Instruction Manual page 27

6.10.2 FREEZE ACTIVITY
During frame scan, random scan or auto patrol, camera images will not be shown while the dome
camera moves from the current position to the next position.
Menu
To set STOP TIME:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to OTHERS and press the OPEN button to access the menu.
3. Position the cursor next to FREEZE ACTIVITY and press the OPEN button to move the cursor
to the right.
4. Move the joystick up or down to set freeze activity to ON or OFF.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.10.3 LOAD FACTORY DEFAULTS
The factory default settings can be loaded.
Menu
To set LOAD FACTORY DEFAULT:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to OTHERS and press the OPEN button to access the menu.
3. Position the cursor next to LOAD FACTORY DEFAULT and press the OPEN button twice to load
factory default settings.
Downloaded from www.Manualslib.com
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
manuals search engine
OTHERS MENU
POWER UP
FREEZE ACTIVITY ON
LOAD FACTORY DEFAULT
TILT ANGLE OUTDOOR
OTHERS MENU
POWER UP
FREEZE ACTIVITY ON
LOAD FACTORY DEFAULT
TILT ANGLE OUTDOOR
- 27 -
PARK
PARK