Lcd Monitor Cabling Diagram - Wacom CINTIQ 17SX Installation Manual And User's Manual

LCD MONITOR CABLING DIAGRAM

DTU-710, Rear View
DVI Connector
Do not attach the
USB data cable until
instructed to do so.
C
AUTION
Do not use any cable that did not come with the DTU-710; use of an improper cable
may damage the unit.
Make sure your video card has a DVI or VGA connector, and that you correctly
set the DTU-710 D
The use of an improper video card may damage the DTU-710.
Do not connect or disconnect the video or power cables while the DTU-710 or your
computer are turned on – this can damage the LCD monitor or computer video card.
Do not exceed a display refresh rate of 75 Hz – this can overheat the LCD monitor and
cause permanent damage.
Power Adaptor
/A (DVI/VGA) switch for the video card you are using.
IGITAL NALOG
– C –
DC
IN
D /A
IGITAL NALOG
– B –
DVI to DVI Cable
Or...
DVI to VGA Cable
Video card
DVI or VGA
Rear panel of your computer
– D –
Analog
– A –
Digital
(DVI/VGA) Switch
To AC Outlet
INSTALLATION
Page 11