Software Installation - Wacom CINTIQ 17SX Installation Manual And User's Manual

SOFTWARE INSTALLATION

To install the tablet software:
• Save your work and close all open applications before installing the tablet software.
Temporarily disable any virus protection programs.
• Insert the Wacom Pen Tablet Driver CD into your computer's CD-ROM drive. The software installer
menu should automatically display. If you are running Macintosh OS X or the menu does not
display, double-click on the I
• Click on the I
NSTALL
• Re-enable your virus protection program.
• After the software installation has been completed, make sure you can use your pen on the
DTU-710 display to move the screen cursor. The screen cursor should be located approximately
beneath the pen tip. To fine-tune the cursor-to-pen relationship, see Calibrating the DTU-710 on
page 19.
Be sure to check the Read Me file for late-breaking news. If you have trouble installing the DTU-710,
see the Troubleshooting section beginning on page 28 of this manual.
Next Steps:
Be sure to adjust the pen display tablet calibration to precisely align the screen cursor position with
the location of the pen tip. Refer to Calibrating the DTU-710 on page 19.
To learn more about using the DTU-710, proceed to Working with the DTU-710 and to Using the
Pen . See page 15 and page 16.
INSTALLATION
Page 14
icon located on the CD.
NSTALL
T link and follow the prompts to install the driver software.
ABLET