Figure 5.16 Display Settings: Windows 98 - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

C h a p t e r 5
Make sure you have an NVIDIA GPU-based multi-display graphics card
1
installed in your computer and all your display devices are securely
connected to your computer and turned on!
Confirm that the current version of the NVIDIA Display Driver software
2
(including the nView Desktop Manager application) has been installed on
your system.
Start Windows.
3
From your desktop, right click to open the properties menu, then click
4
Properties and Settings (tab). You'll notice that (at least) two monitor
images appear on the Settings panel
Figure 5.16
Note: If you are using an NVIDIA multi-display graphics card (such as a
To turn on (enable) the secondary display (monitor image 2), go to the next
5
step.
49
U s i n g n V i e w M u l t i - D i s p l a y M o d e s : D u a l v i e w v s . S p a n / C l o n e
Display Settings: Windows 98
GeForce4 MX) but have only one display device connected (such as a
CRT), you will see two monitor images on the Settings panel even
though only one display device is connected. You cannot enable the
second display until you physically connect a second display device to
the graphics card.
(Figure 5.16). This is Dualview mode.
N V I D I A C o r p o r a t i o n