C h a p t e r 8
Figure 8.13
Note: Use this feature if you have plugged in any display devices after the
Based on the example shown in
6
from Analog Display (CRT) to TV or, based on the example in
you would click Digital Display to switch from TV to Digital Display.
When the "Device Settings" message appears, click OK before the message
7
times out. The "Confirm Display Settings" message appears on your digital
display.
Click Yes before the message times out. You entire desktop moves over to
8
the display you selected.
95
Display Settings Dualview Mode: Windows 98
control panel was opened.
D e v i c e S e l e c t i o n A n d C o n f i g u r a t i o n
Figure
8.14, you would click TV to switch
Figure
8.15,
N V I D I A C o r p o r a t i o n