Activating Nview Dualview Mode: Windows 9X; Figure 5.15 Nview Span/Clone Options Disabled In Dualview Mode: Windows Xp - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

N V I D I A D i s p l a y P r o p e r t i e s R e l e a s e 4 0
Click nView Display Mode to display the associated properties panel.
10
Notice that the nView Span/Clone mode options are disabled because you are
in nView Dualview mode.
Figure 5.15

Activating nView Dualview Mode: Windows 9x

Notes:
When you start Windows 9x in multi-display configuration, Windows starts in
"Dualview" mode. You may only need to do an "attach" procedure to enable the
secondary display device. Follow these steps
N V I D I A C o r p o r a t i o n
(Figure
nView Span/Clone Options Disabled in Dualview Mode: Windows XP
• Dualview mode is not supported under Windows 95.
• Under Dualview mode, when you switch to a full-screen
Microsoft DOS window or boot to a DOS prompt, the display is
limited to the primary display device.
• Under Dualview mode, OpenGL-based applications will only
run using Microsoft's software rendering implementation of
OpenGL. This is due to a design limitation within Windows.
5.15)
U s e r ' s G u i d e
.
48