Mackie D8B3.0 Owner's Manual page 40

Routes sound arriving at the in-panel Talkback
mic to the Studio outputs.
Note: Make sure the speakers that are connected to
the Studio Outs are located in another room to avoid
feedback when the TALKBACK TO STUDIO button is
depressed.
Disengages all engaged solo buttons throughout
the entire console. This is especially convenient
considering sections may be soloed across multiple
fader banks.
Assigns the V-Pot in the Studio/Solo section to
adjust the solo level being fed to the Control Room
outputs. Not applicable to mixdown solo (use L/R
fader to adjust mixdown solo level).
Assigns the V-Pot in the Studio/Solo section to
adjust the output level being fed to the Studio
monitor system.
Assigns the V-Pot in the Studio/Solo section to
control the preamp level for the in-panel Talkback Mic.
• Blinks whenever a Solo button is engaged.
Phones/Cue Mix 1 and 2 select the sources and
sets levels for the Phones outputs.
Assigns the Aux 9-10 mix to the Phones output.
Assigns the Aux 11-12 mix to the Phones output.
Pressing this causes all channel settings to be
copied to the channel V-Pots for the selected CUE
MIX 1 (Aux 9-10) or CUE MIX 2 (Aux 11-12). This is
a very quick way to copy the MASTER L-R mix,
including effects, to the phones output, which can
then be easily fine-tuned.
Assigns whatever is selected in the Control Room
section to the Phones output. Solos are also routed
to the Phones output when Control Room is selected.
Adjusts the Phones output level.
These buttons:
• Select the source for the control room outputs.
• Select Main or Nearfield control room outputs.
• Adjust the listening level.
• Selects the signal at the 2 Track A, B, or C in-
put as the Control Room source.
• These inputs can be selected independently or
together for simultaneous playback along with
the MASTER L-R button.
Note: When DIGITAL IN 1 or DIGITAL IN 2 are selected,
MASTER L-R and 2-TRACK inputs are unavailable.