Mackie D8B3.0 Owner's Manual page 104

It's typically best to monitor signal from the
multitrack rather than from the channel input.
Record Ready Buttons
TAPE IN Bank
Select TRACKING LEVEL. This sets the channel
V-Pots to adjust the D8B output level to tape.
M o d u l a r D i g i t a l M u l t i t ra c k
Aux 9/10 and 11/12 are perfect for stereo
headphone sends. It's often convenient for the
musicians to, at first, monitor the L/R mix in the cue
section (PHONES/CUE MIX 1 and 2). Once the initial
L/R mix is established, copy it to the appropriate
cue, then customize for individual monitoring needs.