Mackie D8B3.0 Owner's Manual page 119

(3) DIO•8 cards for HDR24/96
(3) DIO•8 cards for D8B
(1) Clock I/O card for D8B
(3) TDIF cables
(1) 75 BNC word clock cable
1. Connect the three TDIF cables
between the corresponding TDIF jacks
on the HDR24/96 and D8B.
2. When TDIF is used, the D8B must
have a Clock I/O card installed. To
make the D8B the clock master,
connect its Word Clock Out (not
Apogee
Clock I/O
Card
Word
Clock Out
Word
Clock In
Word
Clock Out
(HDR24/96
as Master)
Use
only
Depress the
Termination
button if the
HDR24/96 is
set to Slave
Word
Clock
HDR
Out
(D8B as Sync
Master) Card
one
Word
Clock In
Word
Clock Out
DIO•8 Sync out) to the HDR24/96
Word Clock In. To make the HDR24/96
the clock master, connect its Word
Clock Out to the D8B Word Clock In.
1. Set the Tape Input format for each
DIO•8 card to TDIF, and the Tape
Output format to TDIF.
2. If the HDR24/96 is the clock master,
set the Sample Clock to Internal; if it
is a clock slave, set it to Word Clock
and depress the 75 termination
switch on the Sync card.
3. Set the Sample Rate to 44.1kHz or
48kHz according to your preference.
DIO•8 Cards
TDIF Connection
TDIF Cables
(DB25)
TDIF Connection
DIO•8 Cards