Table Of Contents - Delta RT-31 Instruction Manual

Table of Contents

Safety Rules For All Tools2
Additional Safety Rules For Circular Saws3
Changing Voltage On The Three Phase Saw4
Assembling Blade Raising And Blade Tilting Handles4
Assembling Extension Wing To The Saw4
Assembling Saw Blade5
Assembling Scoring Blade5
Assembling Splitter, Table Insert And Blade Guard6
Constructing Unifence Table6
Assembling Unifence Table And Guide Rail To The Saw7
Assembling Unifence To Guide Rail10
Assembling Stop Rod Ass'y To Miter Gage11
Saw Blade Raising And Tilting Mechanisms11
Adjusting 90 Degree And 45 Degree Positive Stops11
Adjusting Scoring Blade12
Adjusting Fence Parallel To Miter Gage Slots12
Adjusting Clamping Action Of Fence Locking Handle12
Adjusting Miter Gage And Stop Rods13
Adjusting V-Belt Tension13
Adjusting Tension On Scoring Drive Belt14
Scoring Belt Tracking14
Elevating And Bevel Shaft End Play Adjustment14
Upper And Lower Blade Stop Adjustment15
Chip Exhaust Chute15
Start/Stop Switch15
Unifence Operation16
Ripping On Left Side Of Saw Blade17
Using The Unifence As A Cut-Off Gage17
Miter Gage And Adjustable Stop Rod Operation17
Assembling Miter Gage Support Extension18
Accessory Storage18
Dado Cutting With The Rt-31 10" Panel Saw21
Installing Dado Heads Sets21
Preparing Table Inserts22
Exploded View 123
Exploded View 226
Exploded View 328