Attery Ndicator - Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual

B i
Attery ndicAtor
When turned ON, the battery indicator on the display lets you
know approximately how much battery life is remaining. When
turned OFF, the battery indicator will appear and blink only
when the battery voltage level is low.
When the battery voltage becomes too low while transmitting,
the transceiver stops transmitting, a tone sounds, and the
LED blinks red until you release the PTT switch. Recharge or
replace the battery pack at this time.
High battery power
Medium battery power
Low battery power
Recharge the battery pack
To turn this function on or off:
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
 Press the
 Press the MENU key then press
(battery indicator on) or "bt-oF" (battery indicator off).
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
or key to select "bt".
or to select "bt-on"