Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual page 41

 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
■ c id
Aller
If set up by your dealer, when the transceiver receives
a PTT ID signal, the caller ID of that signal appears on
the display, along with the
making the call.
To turn Caller ID on or off:
 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
 Press the
 Press the MENU key then press
"CI-on" (Caller ID is on) or "CI-oF" (Caller ID is off).
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.

or key to select "CI".
icon, so you know who is
or to select