Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual page 40

 Press the
 Press the MENU key then press
"St-on" (PTT ID Side Tone is on) or "St-oF" (PTT ID Side
Tone is off).
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
■ m h
ute old
Mute Hold Time keeps the speaker muted for a brief
moment, after a signal has been received. This prevents
interference with the PTT ID signal.
To set the hold time:
 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
 Press the
 Press the MENU key then press
"Hd-oF" (hold time is off), "Hd- 5" (500 ms), "Hd-10"
(1000 ms), "Hd-15" (1500 ms), "Hd-20" (2000 ms), or
"Hd-25" (2500 ms).
or key to select "St".
t
ime
or key to select "Hd".
or to select
or to select