Kenwood TK 3230 - FreeTalk XLS UHF Instruction Manual page 38

■ r
eceiving A
When a selcall is received, the
display along with the ID of the caller.
Press the PTT switch and speak into the microphone to
respond to the call, then continue the call as normal. When
the call is finished, press the CAL key to end the call.
■ d t
AtA rAnSmit
To set up a data transmit modulation delay time:
 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
 Press the
 Press the MENU key then press
"dt- 0" (0 ms), "dt- 5" (500 ms), "dt-10" (1000 ms),
"dt-15" (1500 ms), or "dt-20" (2000 ms).
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
S
elcAll
m
odulAtion
or key to select "dt".
icon appears on the
d t
elAy ime
or to select