Functional Description - Delta TwinLaser 36-255L Instruction Manual

Delta 12" compound laser miter saw instruction manual

Hide thumbs Also See for TwinLaser 36-255L:

Operation (2 pages)

Table Of Contents

Table of Contents

EXTENSION CORDS

Use proper extension cords. Make sure

your extension cord is in good condition and is a 3-wire

extension cord which has a 3-prong grounding type plug

and matching receptacle which will accept the

machine's plug. When using an extension cord, be sure

to use one heavy enough to carry the current of the

machine. An undersized cord will cause a drop in line

voltage, resulting in loss of power and overheating. Fig.

D shows the correct gauge to use depending on the

cord length. If in doubt, use the next heavier gauge. The

smaller the gauge number, the heavier the cord.

FOREWORD

Delta Model 36-255L is a high capacity 12" compound laser miter saw designed to cut wood and non-ferrous metals.

This unit incorporates the latest technology TwinLaser™, line-of-cut indicator feature. It can crosscut 8" x 2¼" and 7" x

3¼", miter at 45° both left and right 5¼" x 2¼", bevel at 45° left 6¼" x 2¼" and 8" x 1¼", and compound 45° x 45°,

5¼" x 2 1/2" and 4¼" x 2¼". It has positive miter stops at 0°, 15°, 22.5°, 31.62°, and 45° both left and right, and bevel

stops at 0° and 45° left.

NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE CURRENT PRODUCTION

MODEL. ALL OTHER ILLUSTRATIONS CONTAINED IN THE MANUAL ARE REPRESENTATIVE ONLY

AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO

ILLUSTRATE TECHNIQUE ONLY.