Connection Details - Singtel Ras - TRENDnet TW100-BRV204 - VPN Firewall Router User Manual

TW100-BRV204 User Guide
Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh

Connection Details - SingTel RAS

If using the SingTel RAS access method, a screen like the following example will be displayed
when the "Connection Details" button is clicked.
Data - SingTel RAS Screen
Internet
RAS Plan
Physical Address
IP Address
•
The Connection Log shows status messages relating to the
existing connection.
•
The Clear Log button will restart the Log, while the Refresh
button will update the messages shown on screen.
If not connected, establish a connection to Telstra Big Pond.
If connected to Telstra Big Pond, terminate the connection.
Delete all data currently in the Log. This will make it easier to read
new messages.
Update the data on screen.
Figure 25: Connection Details - SingTel RAS
The RAS Plan which is currently used.
The hardware address of this device, as seen by remote devices on
the Internet. (This is different to the hardware address seen by
devices on the local LAN.)
The IP Address of this device, as seen by Internet users. This address
is allocated by your ISP (Internet Service Provider).
38