Examples - TRENDnet TW100-BRV204 - VPN Firewall Router User Manual

Examples

This section describes some examples of using the TW100-BRV204 in common VPN situa-
tions.
Example 1: Connecting 2 TW100-BRV204s
In this example, 2 LANs are connected via VPN.
Note
•
The LANs MUST use different IP address ranges.
•
Both endpoints have fixed WAN (Internet) IP addresses.
Configuration Settings
Setting
Name
Remote Endpoint
Local
IP addresses
Remote
IP addresses
Key Exchange
IKE SA Parameters
IKE Direction
Local Identity
Remote Identity
Figure 54: Connecting 2 TW100-BRV204s
LAN A Gate-
way
Policy 1
205.17.11.43
Any
192.168.1.1 to
192.168.1.254
IKE
Both ways
IP address
IP address
LAN B Gate-
way
Policy 1
202.11.13.211
Any
192.168.0.1 to
192.168.0.254
IKE
Both ways
IP address
IP address
Notes
Name does not affect
operation. Select a mean-
ingful name.
Other endpoint's WAN
(Internet) IP address.
Use a more restrictive
definition if possible.
Address range on other
endpoint.
Use a more restrictive
definition if possible.
Must match
Does not have to match.
Either endpoint can block
1 direction.
IP address is the most
common ID method
IP address is the most
common ID method
VPN
81