Defining Sntp Authentication - Cisco SGE2000 Reference Manual

Chapter
15
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
The Add SNTP Server Page contains the following fields:
• SNTP Server — Defines user-defined SNTP server IP address.
• Enable Poll Interval — Indicates whether or not the device polls the selected SNTP server for
system time information.
• Encryption Key ID — Indicates the Key Identification used to communicate between the SNTP
server and device. The range is 1 - 4294967295
3. Define the relevant fields.
4. Click Apply. The SNTP Server is added, and the device is updated.

Defining SNTP Authentication

The SNTP Authentication Page provides parameters for defining the means by which the SNTP server is
authenticated.
1. Click System > System Management > Time > SNTP Authentication. The SNTP Authentication
Page opens:
240
Add SNTP Server Page
Chapter 15: Configuring System Time
Defining System Time