Defining Vlan Properties - Cisco SGE2000 Reference Manual
Gigabit ethernet switch
Hide thumbs
Also See for SGE2000:
- Administration manual (70 pages) ,
- Quick installation manual (32 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Chapter
6
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
Defining VLAN Properties
The VLAN Properties Page provides information and global parameters for configuring and working
with VLANs.
1. Click Bridging > VLAN Management > Properties. The Properties Page opens.
The Properties Page contains the following fields:
•
VLAN ID — Displays the VLAN ID.
•
VLAN Name — Displays the user-defined VLAN name.
•
Type — Displays the VLAN type. The possible field values are:
–
Dynamic — Indicates the VLAN was dynamically created through GARP.
–
Static — Indicates the VLAN is user-defined.
–
Default — Indicates the VLAN is the default VLAN.
•
Authentication — Indicates whether unauthorized users can access a Guest VLAN. The possible
field values are:
–
Enable — Enables unauthorized users to use the Guest VLAN.
–
Disable — Disables unauthorized users from using the Guest VLAN.
2. Click the Add button. The Add VLAN Page opens:
104
Properties Page
Chapter 6: Configuring VLANs
Defining VLAN Properties
Hide quick links:
Advertisement
Table of Contents
