Defining Ip Routing - Cisco SGE2000 Reference Manual

Gigabit ethernet switch
Hide thumbs Also See for SGE2000:
Table of Contents

Advertisement

Chapter
7
SGE2000/SGE2000P Gigabit Ethernet Switch Reference Guide
The ARP Settings Page contains the following fields:
Interface — Indicates the interface connected to the device.
IP Address — Indicates the station IP address, which is associated with the MAC address filled in
below.
MAC Address — Indicates the station MAC address, which is associated in the ARP table with the
IP address.
Status — Indicates the ARP Table entry status. Possible field values are:
Dynamic — Indicates the ARP entry was learned dynamically.
Static — Indicates the ARP entry is a static entry.
3. Define the relevant fields.
4. Click Apply. The ARP Settings are modified, and the device is updated.

Defining IP Routing

Once the switch has been defined as a router, statics routes can be defined. To define IP Routing:
1. Click Routing > IP Routing. The IP Routing Page opens:
140
ARP Settings Page
Chapter 7: Configuring IP Information
Configuring Layer 3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents