Phone; Bluetooth - Chevrolet EQUINOX GMC TERRAIN NAVIGATION SYSTEM - 2011 Introduction Manual

Add to waypoint (used in
conjunction with another
command)
Replace destination (used in
conjunction with another
command)
Yes (used in conjunction with
another command)
No (used in conjunction with
another command)
Destination (used for
Destination VR entry, available
in English language only)
Voice Tag Commands
Navigation [go to] <Voice Tag>
OnStar Command (if equipped)
Hands Free

Phone

Bluetooth

Using Voice Recognition
To use voice recognition, press the
button located on the steering
wheel.
The system responds with a tone.
After the tone say Hands Free to
use the bluetooth voice recognition
system. The system then responds
with Ready, followed by a tone.
After the tone, say a command.
For additional information say Help
while you are in a voice
recognition menu.
Pairing a Phone
1. Press . For vehicles with a
navigation system, say Hands
Free after the tone.
2. Say Bluetooth.
Infotainment System
3. Say Pair. The system responds
with instructions and a four digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturers
user guide.
5. Locate the device named Your
Vehicle in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle, see Listing All Paired
and Connected Phones later in
this section for more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
93