Chevrolet EQUINOX GMC TERRAIN NAVIGATION SYSTEM - 2011 Introduction Manual page 64

64 Infotainment System
Lat/Long Coordinates
Choose a destination based on
Latitude and Longitudinal
coordinates.
Enter in the location as coordinates,
Latitude and Longitude.
1. Press the DEST button.
2. Press the Lat/Long screen
button.
3. Enter the coordinates for the
destination in degrees, minutes,
and seconds.
4. Press the Go screen button. The
route calculates.
5. Press to select the route
preference either for the Fastest,
Shortest, or Easiest. See
Navigation Settings under
for more information.
6. Press the Start Guidance screen
button and start the route.
Preset Destination
Set a destination by selecting from
one of six previously stored
destinations. If a destination is not
set for one of the screen buttons,
the button dims and is not available
to use. See Adding or Changing
Preset Destinations later in this
section for information on how to
add a preset destination.
1. Press the DEST button.
2. Press one of the available
Preset Destination screen
buttons. The screen buttons
were stored with the name
selected. The route is
calculated.
3. Press to select the route
preference either or Fastest,
Shortest, or Easiest. See
Navigation Settings under
for more information.
4. Press the Start Guidance screen
button and start the route.