Maps - Chevrolet EQUINOX GMC TERRAIN NAVIGATION SYSTEM - 2011 Introduction Manual

52 Infotainment System
Map Database Information
Displays map database version
information.
Press the Coverage button to view
the major metropolitan
coverage area.
Low Fuel Warning: When
pressed, a popup screen displays
gas station icons on the map or lists
the five nearest gas stations.
Back Track Mode: When pressed,
the back track feature is on. See
BACK TRACK earlier in this section.
Show 3-D Landmark: When
pressed, 3-D landmarks display on
the map screen.

Maps

This section includes basic
information needed to know about
the map database.
Map Coverage
The navigation maps are stored on
the hard drive.
For more information on map
coverage, see Navigation Settings
earlier in this section.
Installing the DVD Map Disc
The factory installs the map
database information on the HDD.
An updated map disc can be used
to update the map database
information, see
later in this
section.
Before updating the map database
on the HDD, read the following
steps:
1. Turn ignition on.
2. Press VOL / to turn the
system on.
3. Insert the map update disc into
the slot, label side up.
4. Press the Update screen button
when the Update Confirmation
screen displays.
5. Enter the Authentication Code
screen button, then press the
Enter screen button.
6. If the correct code is entered,
the system starts updating and
the status bar displays.
7. Press after the map
database update is completed.
If the application update file is
included in the disc, the application
update is also done.