Chevrolet EQUINOX GMC TERRAIN NAVIGATION SYSTEM - 2011 Introduction Manual page 44

44 Infotainment System
Remote Control
To use the remote control, aim it at
the transmitter window at either
seatback console and press the
button. Direct sunlight or very bright
light could affect the ability of the
RSE transmitter to receive signals
from the remote control. Check the
batteries if the remote control does
not seem to be working. See
Battery Replacement later in this
section. Objects blocking the line of
sight could also affect the function
of the remote control.
If a CD, DVD, or MP3 disc is in the
Radio DVD slot, the remote control
button can be used to turn on the
video screen display and start the
disc. The Infotainment system can
also turn on the video screen
display. See
for more information
Use the infotainment system to turn
the video screen display on.
Storing the remote
control in a hot area or in direct
sunlight can damage it, and the
repairs will not be covered by the
warranty. Storage in extreme cold
can weaken the batteries. Keep
the remote control stored in a
cool, dry place.
Remote Control Buttons
(Power): Press to turn the video
screens on and off.
(Illumination): Press to turn the
remote control backlight on. The
backlight times out after several
seconds if no other button is
pressed.
(Title): Press to return to the
main menu of the DVD. This
function could vary for each disc.
(Main Menu): Press to access
the DVD menu. The DVD menu is
different on every DVD. Use the
navigation arrows to move the
cursor. After making a selection
press the enter button. This button
only operates when using a DVD.
, , , (Menu Navigation
Arrows): Use the arrow buttons to
navigate through a menu.
(Enter): Press to select the
highlighted choice in any menu.
(Display Menu): Press to adjust
the brightness, screen display
mode, and display the
language menu.
(Return): Press to exit the
current active menu and return to
the previous menu. This button
operates only when the display
menu or a DVD menu is active.