Chevrolet CAMARO - 2010 Owner's Manual page 160

6-26 Infotainment System
3. Say Change phone . The
system responds Please wait
while I search for other phones .
If another phone is found,
the response will be
<Phone name> is now
connected .
If another phone is not
found, the original phone
remains connected.
Storing Name Tags
The system can store up to thirty
phone numbers as name tags that
are shared between the Bluetooth
and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
Store
Digit Store
Directory
Using the Store Command
The store command allows a phone
number to be stored without
entering the digits individually.
1. Press . The system
responds Ready followed by
a tone.
2. Say Store . The system
responds Store, number please
followed by a tone.
3. Say the complete phone number
to be stored at once with no
pauses.
If the system recognizes
the number the response is
OK, Storing .
If the system does not
recognizes the phone
number, the response is
Store <Phone number> .
Please say yes or no .
If the number is correct, say
Yes . If the number is not
correct, say No . The
system will ask for the
number again.
4. After the system stores the
phone number, it responds
Please say the name tag
followed by a tone.
5. Say a name tag for the phone
number. The name tag is
recorded and the system
responds About to store <name
tag>. Does that sound OK? .
If the name tag does not
sound correct, say No and
repeat Step 5.
If the name tag sounds
correct, say Yes and the
name tag is stored. After
the number is stored the
system returns to the
main menu.