How To Use This Guide - Plustek V1.2 User Manual

How to Use This Guide

This User's Guide provides instructions and illustrations on
how to install and operate your scanner. We recommend that you
read through the entire Hardware Installation, Chapter I, before you
begin installing the scanner.
Chapter I describes how to install the scanner to your computer.
Note: The scanner's interface is through an Enhanced Parallel
Port (EPP) . If your computer does not support EPP , you may
need to purchase an additional parallel port
Chapter II describes how to install the scanner's software. We
suggest that you do not install the software before installing the
hardware.
After you complete installing the scanner's software, test the
scanner by following the steps outlined in Chapter III. Chapter III
describes how to test, maintain and clean your scanner. Chapter IV
describes how to use the TWAIN interface. TWAIN is a scanning
standard and one of the most widely used technologies in the
scanner industry today. Please carefully read through Chapter IV to
learn about how to operate the scanner's TWAIN interface.
Appendices A & B have technical support information that can
help you solve problems. Before calling for help, please read
through Appendix A: Troubleshooting.
.
v