Plustek V1.2 User Manual page 19

Place a picture at the
back of scanner and
face-down.
4. Open the document cover and place a picture onto the
scanning window face-down.
5. Next go to the scanner's programme group and open the
Scanner Utility .
6. Click on the Lamp Control tab located at the bottom of the
dialogue box.
7. While looking at the scanner, click on the Turn on Lamp
and Turn off Lamp icons (see Figure 3). This test checks to
see if the scanner's light source is properly working.
8. Slowly close the document cover.
Figure 2. Flatbed Scanner
Document Cover
Scanning Window
11