Installing The Scanner's Hardware - Plustek V1.2 User Manual

Installing the Scanner's Hardware

section. The following section describes how to connect the
scanner to your computer and printer. Please carefully follow
along to ensure proper installation.
1. Turn OFF your computer, its related peripherals and
Caution
2. Please take a moment to study Figure 1.
Printer
3. If you have a printer connected to your computer, please
4. Plug the female end of the SCANNER CABLE into the rear
If you have already installed your scanner, please skip this
disconnect all related power cables !
Power Adapter
Printer
Step 2
Figure 1. Connecting the Scanner
disconnect its cable from the rear of the computer. If you
have more than one printer port connected to you computer,
then locate the printer port that's the Enhanced Parallel Port
(EPP).
Step 4
Scanner
Host
Step 1
3
Computer