Chapter Iii. Care And Maintenance; Cleaning The Scanner; Cleaning Materials - Plustek MobileOffice AD470 User Manual

C
HAPTER
Your scanner is designed to be maintenance-free. However, constant care and
maintenance can keep your scanner working smoothly.
C
LEANING THE
Paper powder, dust, ink and toner from paper being scanned may make the inner
ADF dirty, which leads to poor image quality or document-feeding errors. Cleaning
frequency depends on the type of paper and number of pages being scanned.
Perform the following procedures to clean the scanner surface and the ADF unit.
Gently wipe locations described herein. Do not rub too hard.
Warning

Cleaning Materials

Have the following cleaning materials ready to clean the scanner:
 soft, dry, lint-free cloth (or a cotton swab)
 non-abrasive cleaner—Isopropyl alcohol (95%). DO NOT use water.
Attention
III. C
ARE AND
S
CANNER
 Before cleaning the scanner, turn off the
scanner and disconnect the scanner's power
cable and USB cable, and then wait a few
minutes for the glass and/or the inner ADF to
cool to ambient temperature.
 Wash your hands with soap and water after

cleaning the scanner.

 Alternatively you can use glass cleaner or
neutral window cleaning detergent to clean the
scanner glass ONLY.
 DO NOT clean the ADF feed roller or pad
module with glass cleaner or window cleaning
detergent.
 Use of other cleaning materials could damage
your scanner.
M
AINTENANCE
21