Wep Encryption; Figure 33 Wireless: No Security; Table 28 Wireless No Security - ZyXEL Communications P-334WH User Manual

P-334WH User's Guide

Figure 33 Wireless: No Security

The following table describes the labels in this screen.

Table 28 Wireless No Security

LABEL
Security Mode
Apply
Reset

4.3.2 WEP Encryption

WEP encryption scrambles the data transmitted between the wireless stations and the access
points to keep network communications private. It encrypts unicast and multicast
communications in a network. Both the wireless stations and the access points must use the
same WEP key.
Your ZyXEL Device allows you to configure up to four 64-bit, 128-bit or 256-bit WEP keys
but only one key can be enabled at any one time.
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
74
DESCRIPTION
Choose No Security from the drop-down list box.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to reload the previous configuration for this screen.
Chapter 4 Wireless LAN