Cisco 7970G - IP Phone VoIP Phone Manual page 74

If you want to...
Add a service to an
available
programmable phone
button
Access a service on your
phone
66
Then do this after you log in...
1. Choose User Options > Device.
2. Choose a phone from the Name drop-down menu.
3. Click Service URL.
Note If you do not see this option, ask your system administrator to
configure a service URL button for your phone.
4. Choose a service from the Button Service drop-down list.
5. If you want to rename the service, edit the label fields.
Note Your phone uses the ASCII Label field if the phone does not support
double-byte character sets.
6. Click Save.
7. Click Reset to reset your phone (necessary to see the new button label
on your phone).
Select a service using one of the following buttons:
Programmable phone button:
( ) > Services
Feature buttons:
Messages
Services
Directories
Note The services available for your phone depend on the phone system
configuration and the services you subscribed to. Ask your phone
system administrator for more information.
Note If only one service is configured, the service opens by default. If more
than one service is configured, select an option from the menu on the
screen.
OL-15895-01