Cisco 7970G - IP Phone VoIP Phone Manual page 65

If you want to...
Add a new Fast Dial
code (not using a PAB
entry)
Search for Fast Dial
codes
Place a call using a
Fast Dial code
Delete a Fast Dial
code
Log out of Personal
Directory
Tips
• Your system administrator can provide you the user ID and PIN that you need to log in to Personal
Directory.
• Personal Directory automatically logs you out after a certain amount of time. This time limit can
vary. Ask your system administrator for more information.
• Use the numbers on your keypad to enter characters on your phone screen. Use the Navigation
button on your phone to move between input fields.
• Your phone might be set up for international call logging, which is indicated by a "+" symbol on
the call logs, redial, or call directory entries. See your system administrator for more information.
Cisco Unified IP Phone 7970 Series for Cisco Unified Communications Manager 7.0
Then...
1. Choose > Personal Directory > Personal Fast Dials.
2. Press Fast Dial.
3. Highlight a Fast Dial code that is unassigned and press Select.
4. Press Assign.
5. Enter a phone number.
6. Press Update.
1. Choose > Personal Directory > Personal Fast Dials.
2. You can choose Previous or Next to move through listings.
3. Highlight the listing that you want and press Select.
1. Search for a Fast Dial code.
2. Highlight the listing you want and press Select.
3. Press Dial.
4. Choose OK to complete the action.
1. Search for a Fast Dial code.
2. Highlight the listing you want and press Select.
3. Press Remove.
1. Choose > Personal Directory (exact name can vary).
2. Choose Logout.
57