Adding Phonebook Entries; Deleting All The Entries; Chain Dialing; Using Call Waiting - Uniden D1364 Series User Manual

To...
add 1 at the front of CID number
add the area code
store the current CID or redial entry
to the phonebook
edit the current phonebook entry
delete the current entry
close the list
# When it's in standby, the handset shows how many calls came in
since the last time you checked the CID list.

Adding Phonebook Entries

With the phone in standby, open the phonebook. Press
select Create New. Proceed to enter a name and number.
x Enter the phone number (up to 20 digits) exactly as you would dial it.
x If you need to enter a pause between the numbers, press
see a P in the display. (The dialing will pause for about 2 seconds per a digit.)
x To edit the number, press
Re-enter the correct numbers.

Deleting All the Entries

With the phone in standby, open the list (phonebook, CID, or redial). Press
and then select Delete All. To confirm, select Yes.
SELECT

Chain Dialing

If you often have to enter a series of digits or a code number during a call,
you can save that code number as a regular phonebook entry and use the
phonebook to send the code number.
Make a call normally. When you hear the prompt that asks you to enter your
number, open the phonebook and find the entry. Press
the code. If you change your mind, just close the phonebook.

Using Call Waiting

x Call Waiting, a service available from your telephone provider, lets you
receive calls while you are on another call. Caller ID on Call Waiting
(CIDCW) service displays Caller ID information for a waiting call.
x If you get a Call Waiting call, the phone sounds a tone. Press
switch between the current call and the waiting call; each time you switch,
there is a short pause before you're connected to the other caller.
8 - English
Press...
*
before dialing for a toll call.
before dialing.
#
MENu/SELECT
Proceed to edit the name and number.
MENu/SELECT
MENu/SELECT
Delete Entry). To confirm, select Yes.
phONEBOOk/LEFT
to back up the cursor and delete numbers.
CLEAr
, then select Store Into PB.
, then select Edit.
, then select Delete (or
.
MENu/SELECT
rEdIAL/pAuSE
MENu/SELECT
TALk/FLASh
and then
; you'll
MENu/
to send
to