Page 1
If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! x Call waiting, CID, CIDCW, and Voice Mail are telephone line services. Contact your provider for details. x Need help? Get answers 24/7 at our website: www.uniden.com. If You... Contact Uniden’s... Phone Number...
TABLE OF CONTENTS What’s in the manual? Global Setup Menu....7 Using Your Phone ....... 7 Getting Started ......3 Basics .......... 7 Installing Your Phone ....3 Changing the Volume ....7 Charge the Battery ......3 Using the Phonebook, Caller ID, Connect the Telephone Cord ..3 and Redial Lists ......
GETTING STARTED Installing Your Phone Charge the Battery 1. Unpack the handset, battery pack, and battery cover. If you need to remove the cover, press in on the notch and slide the cover down and off. 2. Line up the battery connector with the jack inside the handset;...
GETTING TO KNOW YOUR PHONE Earpiece Status FIND Display HANDSET CLEAR MENU/SELECT PHONEBOOK/ CALLER ID/LEFT LEFT TALK/ FLASH DOWN Twelve- CHARGING key dial CONTACTS Base REDIAL/ PAUSE MESSAGES What it does MUTE Microphone x In standby: page the handset. FINd Charging contacts Handset...
Key (icon) What it does x In standby: open the menu. MENu/SELECT x In any menu or list: select the highlighted item. x In standby or during a call: open the Caller ID list. CALLEr Id/rIghT x During a call: hang up. x In any menu or list: exit and go to standby.
To... Press... switch between upper and lower case letters rotate through the punctuation and symbols Using the Menu x If you don't press any keys Press MENU/SELECT for about thirty seconds, the open the menu. Press MENU/SELECT to choose handset exits the menu. Handset Setup the current option.
Global Setup Menu Menu Option What it does Dial Mode Choose tone or pulse dialing (see p. 3). Program your voice mail access number so you can get Edit Voice Mail messages by pressing one button (see p. 9). VMWI Reset Reset the Visual Message Waiting Indicator (see p.
To... Press... add 1 at the front of CID number before dialing for a toll call. add the area code before dialing. store the current CID or redial entry , then select Store Into PB. MENu/SELECT to the phonebook Proceed to edit the name and number. edit the current phonebook entry , then select Edit.
Finding the Handset With the phone in standby, press on the base. The handset will beep for 1 FINd minute. To cancel, press again or press any handset key. FINd Voice Message Notification If you subscribe to a voice mail service, your phone displays the voice mail icon ( ) when you have a new message.
TROUBLESHOOTING Problems Possible solutions x Check the telephone cord connection. x Disconnect the base AC adapter. Wait a few minutes, I can’t make or receive then reconnect it. calls. x Make sure the base is plugged in. The handset won’t ring. x Make sure the ringer is turned on.
Wash hands after handling. temperatures. Uniden works to reduce lead content in x Replace the battery when the talk PVC coated cords in our products and or standby time becomes noticeably accessories.
Page 12
compliant. See installation instructions for If your home has wired alarm equipment details. connected to a phone line, be sure that installing the system does not disable your The REN is used to determine the number alarm equipment. If you have questions of devices that may be connected to a phone about what will disable alarm equipment, line.
Uniden Product to be free from for compliance with the guidelines.) Third defects in materials and craftsmanship with...
Page 14
ALL OTHER WARRANTIES OF should be shipped freight prepaid, by ANY NATURE WHATSOEVER, traceable means, to warrantor at: WHETHER EXPRESS, IMPLIED Uniden America Service OR ARISING BY OPERATION 4700 Amon Carter Blvd. OF LAW, INCLUDING, BUT Fort Worth, TX 76155...