Adapter And Battery Information; Compliance Information - Uniden D1364 Series User Manual

Adapter and Battery Information

AC adapter
Part number
Input voltage
Output voltage
Battery pack (with normal use)
Part number
Capacity
Talk time
Standby time
Battery life
x Use only the supplied AC adapter.
x Use the proper adapter for the base.
x Do not place the unit in direct
sunlight or subject it to high
temperatures.
x Replace the battery when the talk
or standby time becomes noticeably
reduced. For replacements, call the
Parts Department (see the front
cover).
x When the battery gets low, the
handset beeps or shows a low
battery alert; put the handset in the
cradle for recharging.
Rechargeable Battery Warning
x This equipment contains a rechargeable
Nickel-Metal-Hydride (Ni-MH) battery.
x Nickel is a chemical known to the state of
California to cause cancer.
x Do not short-circuit the battery.
x The batteries in this equipment may explode
if disposed of in a fire.
x Do not charge the batteries in any charger
other than the one specified in the owner's
manual. Using another charger may damage
the battery or cause it to explode.
PS-0035
120V AC, 60 Hz
8V AC @ 300mA
BT-1021
300mAh, 2.4V DC
about 7 hours
about 6 days
about 1 year
x As part of our commitment to protecting our
environment and
conserving natural
resources, Uniden
voluntarily participates in
an RBRC industry
®
program to collect and
recycle used Ni-MH
batteries within the
United States. Please call
1-800-8-BATTERY for information on
Ni-MH battery recycling in your area.
(RBRC is a registered trademark of the
®
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be recycled
or disposed of properly.
Warning! The cords on this product and/
or accessories contain lead, a chemical
known to the state of California to cause
birth defects or other reproductive harm.
Wash hands after handling.
Uniden works to reduce lead content in
PVC coated cords in our products and
accessories.

Compliance Information

FCC Part 68 Information
This equipment complies with Part 68 of
the FCC rules and the requirements adopted
by the ACTA. On the bottom of this
equipment is a label that contains, among
other information, a product identifier in
the format US: AAAEQ##TXXXX. If
requested, this number must be provided to
the phone company.
An applicable Universal Service Order
Codes (USOC) certification for the jacks
used in this equipment is provided (i.e.,
RJ11C) in the packaging with each piece
of approved terminal equipment. A plug
and jack used to connect this equipment to
the premises wiring and telephone network
must comply with the applicable FCC
Part 68 rules and requirements adopted by
the ACTA. A compliant telephone cord
and modular plug is provided with this
product. It is designed to be connected
to a compatible modular jack that is also
English - 11