Adapter And Battery Information; Compliance Information - Uniden D1780 User Manual

Adapter and Battery
Information
AC adapter
Part number
Input voltage
Output voltage
x Use only the supplied AC adapters.
x Use the proper adapter for the base &
any chargers.
x Do not place the unit in direct sunlight
or subject it to high temperatures.
Battery pack (with normal use)
Part number
Capacity
Talk time
Standby time
Battery life
x Replace the battery when the talk or
standby time becomes noticeably re-
duced. For replacements, call the Parts
Department (see the front cover).
x When the battery gets low, the handset
beeps and shows a low battery alert;
put the handset in the cradle for
recharging.
Rechargeable Battery Warning
x This equipment contains a recharge-
able Nickel-Metal-Hydride (Ni-MH)
battery.
x Nickel is a chemical known to the state
of California to cause cancer.
x Do not short-circuit the battery.
x The batteries in this equipment may
explode if disposed of in a fire.
x Do not charge the batteries in any
charger other than the one specified
in the owner's manual. Using another
charger may damage the battery or
cause it to explode.
PS-0034
120V AC, 60 Hz
7.8V AC @ 450mA
BT-1025
400mAh, 2.4V DC
about 7 hours
about 7 days
about 1 year
x As part of our commit-
ment to protecting our
environment and
conserving natural
resources, Uniden
voluntarily participates
in an RBRC® industry
program to collect and
recycle used Ni-MH batteries within
the United States. Please call
1-800-8-BATTERY for information on
Ni-MH battery recycling in your area.
(RBRC® is a registered trademark of the
Rechargeable Battery Recycling
Corporation.)
Rechargeable batteries must be
recycled or disposed of properly.
Warning! The cords on this
product and/or accessories
contain lead, a chemical known
to the state of California to
cause birth defects or other
reproductive harm. Wash hands
after handling.
Uniden works to reduce lead
content in our products &
accessories.

Compliance Information

FCC Part 68 Information
This equipment complies with Part
68 of the FCC rules and the require-
ments adopted by the ACTA. On the
bottom of this equipment is a label that
contains, among other information,
a product identifier in the format US:
AAAEQ##TXXXX. If requested, this
number must be provided to the phone
company.
An applicable Universal Service
Order Codes (USOC) certification for
the jacks used in this equipment is
provided (i.e., RJ11C) in the packaging
with each piece of approved terminal
English - 23