Idle Phone Softkeys; Cisco Callmanager Softkeys; Setting Up The Idle Url For A Cisco Wireless Ip Phone 7920; Configuring Telephony Features - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Chapter 7 Configuring Features, Templates, Services, and Users

Idle Phone Softkeys

Cisco CallManager Softkeys

Setting Up the Idle URL for a Cisco Wireless IP Phone 7920

Configuring Telephony Features

Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
OL-7104-01
You can control whether a Cisco Wireless IP Phone 7920 displays PhBook for
accessing the local phone book or Svcs for accessing IP Phone Services when the
phone is in an idle state.
When users prefer to have other softkeys appear instead of Mute and Volume
during a call, you can set up a softkey template and assign it to the Cisco Wireless
IP Phone 7920.
You must assign the modified softkey template to the Cisco Wireless IP Phone
and have the Cisco CallManager softkeys display initially. For more information
about modifying softkey templates, see the
section on page 7-8.
Administrators can assign an idle URL for all phones in the Cisco CallManager
system or to individual phones.To provide users access to a URL that displays
information or a company logo when the phone is idle, you must use
Cisco CallManager Administration.
After you add Cisco IP Phones to Cisco CallManager, you can add functionality
to the phones. Table 7-1
which you can configure using Cisco CallManager Administration. The
Reference column lists Cisco CallManager documentation that contains
configuration procedures and related information.
For information about using most of the features on the phone, refer to
Cisco Wireless IP Phone 7920 Guide.
Configuring Cisco Wireless IP Phones in Cisco CallManager
"Configuring Softkey Templates"
includes a list of supported telephony features, many of
7-3