Erasing The Local Configuration - Cisco 7920 - Unified Wireless IP Phone VoIP Administration Manual

Administration Options on the Phone Menus
Using Hidden Options on the Phone Menus
Note

Erasing the Local Configuration

Note
Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1
9-22
The hidden administrative settings are for troubleshooting only. You can
temporarily change some parameter settings, such as power save while you are in
administrative mode. When the phone is powered off and powered on, the default
settings for the phone are restored.
The following hidden options are available to administrators for administrative
and troubleshooting purposes:
Erasing the Local Configuration, page 9-22
•
• Using Power Save Mode, page 9-23
Setting the Softkey Option, page 9-23
•
Performing a Trace Route, page 9-24
•
Selecting the Data Rate, page 9-25
•
Selecting the Transmit Power, page 9-26
•
Changing the Cisco Discovery Protocol Settings, page 9-27
•
When you access the administrative mode functions on the Cisco Wireless IP
Phone 7920, you might see additional hidden options and administrative mode
parameters beyond those that are listed. TAC uses these options for
troubleshooting phone and wireless network issues.
You can clear all locally stored configuration options in a phone by using the
Phone Settings menu. When you use the restore to factory default option, all
user-defined entries in Speed Dial, Profiles, Phone Settings, and Call History are
erased, but the Phone Book entries remain.
You can also use the Cisco 7920 Configuration Utility to erase the local
configuration.
Chapter 9 Troubleshooting the Cisco Wireless IP Phone 7920
OL-7104-01