Upgrading The 6/100 And 6/120 Model Libraries - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit

Figure 4-7
Upgrading Library Model 6/140

Upgrading the 6/100 and 6/120 Model Libraries

Upgrading the 6/100 and 6/120 Model Libraries
1. Place the plastic slider tools on top of the existing library (Figure 4-7).
Installing the Plastic Slider Tools
2. Using two people or an appropriately rated mechanical lift, align the
bottom of the upgrade module with the top of the existing library.
(The upgrade module weighs 47 pounds.) Do not lift the library using
the power supply handle.
3. Slide the upgrade module on top of the library until the modules are
aligned. Remove the plastic slider tools by lifting the upgrade module
up and easing the tools out.
4. Finish aligning the two modules by gently moving the upgrade unit
side-to-side until it "clicks" into place. Ensure the modules are
connected by moving the back of the library side-to-side until it also
"clicks" into place.
4-10 Chapter 4