Chapter Overview - HP A5585A - SureStore DLT E Tape Library 4/40 Upgrade Kit

Figure 4-1
Power off and unplug the
library.
Remove the top cover,
forehead, and silver labels
from the existing library.
Secure the upgrade
module to the cabinet by
tightening the screws on
each mounting rail. Re-
install the side panels.
Install the upgrade
notification and cartridge
identification labels.
Upgrading Library Model 6/140

Chapter Overview

Chapter Overview
This chapter describes how to upgrade a 6/140 library by adding a
twenty-slot module on top of the existing library. Model 6/140 has the
capacity for up to six drives and 140 slots.
Here is an overview of the upgrade procedure, which is described in more
detail on the following pages.
Overview of 4/100, 6/100 and 6/120 Slot Upgrade Procedure
Remove the front filler
panel(s) from the top of
the library cabinet.
Install the top cover,
forehead, and retainer
brackets on the upgrade
Install the interconnect
cable between the
motherboards on both
Re-position the RFI cable
on the back left side of the
upgrade module.
4-2
module.
modules.
Remove both top side
panels on the cabinet, as
well as the side panels on
the right of the top library
module and upgrade
module.
Install the upgrade module
on top of the library using
the plastic slider tools.
Install the cosmetic front
panel doors onto the
upgrade module.
Connect the power cord
and power on the library.
Verify the connection, and
run diagnostic tests.
Chapter 4