Setup System; Setup Display - Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR SUPERB-OCTAVIA-YETI 11-2009 Manual

– To change the assignment of a particular shortcut key, select the respective
shortcut key by pressing the key in the following menu.
Note
The selection possibilities of the phone set-up depend on the relevant telephone
preinstallation.

Setup System

Call up the Setup System menu by pressing the range selector key
tion key .
System
Change the system language manually
– Press the button and select the desired language in the opening pop-up
Language
window. When selecting the menu point "automatic", the system language is the
language which is set in the menu of the information display. If desired, another
language can be selected for the unit.
Changing system set-ups
– You can change the set-up of the distance unit.
– You can change the set-up of the time format.
– You can change the set-up of the date format.
Time display
– If you press the function key time display
automatic time display is set in the touch-screen.
– Time display in the operating modes radio, media and map.
– The current time is taken over by the instrument cluster in the vehicle.
– After switching off the unit, the time continues to show.
Reset the factory settings on the unit
– Press on the function key
Factory settings
and the func-
SETUP
, while in the menu Setup System, the
in the menu Setup System.
– Now find the settings you wish to reset.
– If you press the function key Reset
the selected settings will be reset to the factory settings and all the stored data will
be erased.
"Time" and "Date" settings need only be carried out manually under certain circum-
stances. Time and date will normally be accepted automatically from the vehicle into
the unit.

Setup Display

Call up the menu Setup Display by pressing the range selector key
function key .
Display
Brightness
– Press on the function key behind
window.
– Press the function key
Automatic
automatically be adapted to the current light conditions via the sensors on the unit.
– Press one of the other function keys to manually adjust the brightness of the touch-
screen.
Day/night
– Press on the function key behind
window.
– Press the function key
Automatic
change the map display from night to day design.
– Press on the function key or
Day
design of the map display.
Range selector key SETUP
and confirm the following safety interrogation
SETUP
and select a setting in the pop-up
Brightness
if the brightness of the touch-screen should
and select a setting in the pop-up
Day/night
if switching the headlights on and off should also
to manually determine the night and day
Night
13
and the