Table of Contents
Advertisement
46
Range selector key NAV (Navigation)
Waypoint nav. (Offroad Navigation)
Overview of the functions
Open waypoint mode
– Press on the function key
Extras
– Press on the function key
Waypoint nav.
– The menu Waypoint navigation will open and the last active waypoint tour will be
⇒ fig.
indicated
19.
Leave waypoint mode
– In the waypoint mode, you can always change into the menu Waypoint navigation
by pressing the range selector key
– There, press on the function key
in the pop-up window.
Leave waypoint mode
– Alternatively, you can terminate the waypoint mode by calling up the function key
New dest.
in the menu Waypoint navigation.
– Once you have reached the destination of a waypoint tour, the waypoint mode will
close automatically and the "normal" main menu Navigation will open again.
Fig. 19 Waypoint navigation
with active waypoint tour.
in the main menu Navigation.
in the pop-up window.
.
NAV
⇒ fig. 19
and select the
Extras
When in the menu Waypoint navigation, the last active waypoint tour and its current
geo-position will be displayed. If no waypoint tour has been recorded or all of them
have been deleted, a corresponding message will be inserted. In this case the function
keys for starting, loading or processing a waypoint tour are not active.
If a waypoint tour is displayed, the waypoint tour will be started by pressing the func-
tion key
.
Start
The following menus and sub-menus are operated analog to the already described
menus of the navigation system and will no longer be described here in detail:
•
Pressing on a displayed entry or the function key
display.
•
After pressing the function key
correct the entry.
The function key
New dest.
Pressing the function key
will open a safety interrogation:
New dest.
- switches back into the waypoint nav.
Back
- terminates the waypoint nav. and opens the menu New dest. for
Onroad destination
selection of an "Onroad destination" from the available navigation data.
The function key
Memory
Pressing the function key
Memory
will open a pop-up window:
- opens a list of the stored waypoint tours. Press the corresponding
Edit waypoint tour
waypoint tour for selection.
- opens the waypoint tour memory. Stored waypoint tours
Edit waypoint tour memory
can be displayed, renamed or deleted.
The function key
Waypoint tour
Pressing the function key
Waypoint tour
waypoint tour or to process the displayed one.
- starts the display of a new waypoint tour after naming the
Edit waypoint tour
waypoint tour and selecting an acceptance mode. A displayed waypoint tour is auto-
matically stored and can be called up later via the function key
.
Edit waypoint tour
will always open the detailed
, a pop-up window will open in which you can
will open a pop-up window to display a new
Memory
by pressing
Hide quick links:
Advertisement
Table of Contents
