Store And Edit Audio Data (Hdd) - Skoda RADIO NAVIGATION SYSTEM COLUMBUS - FOR SUPERB-OCTAVIA-YETI 11-2009 Manual

Store and edit audio data (HDD)

Store MP3 and WMA data on the hard disk (HDD)
Select titles or folders to be saved
– Check the available audio sources for titles or folders which you may wish to store
on the hard disk. You can also select the complete contents of an installed data
carrier for storing on the hard disk in the selection window of the available audio
sources.
– If you press on the function key
window will open.
– Pressing in the pop-up window will start the play function.
Play
– Press in the pop-up window to store the respective title or folder on the hard
Copy
disk.
– Press Continue in the following pop-up window for confirmation that you have
taken note of the message.
Select memory space and save titles
– Press , if the title or folder should be saved directly on the first level,
Enter file/folder
which is the root folder of the hard disk.
– Or press New folder if a new folder should be created for the title or folder. Choose
a name for this folder from the following menu. The newly created folder is opened
and the name you choose will be indicated in the title line.
– You can now create another folder (one folder has a maximum of seven sub-
folders) or you can save the selected title or folder in the currently described folder.
Press the function key to open the appropriate higher priority folder.
– Press the function key
Enter file/folder
selected point.
– Press Cancel to cancel the saving process of the currently stored title. Once the
saving process has been completed, the pop-up window will close automatically.
Saving 100 music titles of average length of time (3 - 5 minutes) will take approximately
40 minutes.
behind the display of a title or folder, a pop-up
if you wish to save the title or folder at the
If the unit is switched off during the saving process, the saving process will be termi-
nated with the last fully saved title.
Functions and progress display during the memory procedure
You can continue listening to this or another audio source while storing other audio
data.
Data names with a length of max. 32 characters can be displayed.
The function key is blocked in the Audio menu during the memory procedure.
Select.
If the function key is pressed regardless, a pop-up window will open instead of
Select.
the selection menu where the progress of the saving process is displayed. If you press
in the pop-up window, the storing process will be cancelled with the last fully
Cancel
stored title. Press the range selector key
continue the storing process.
Edit stored audio data (titles) and folders
Select title or folder
– Open the selection menu of the available audio sources ⇒ page 23.
– Press on the function key
HDD
disk.
– Select the title or folder to be processed. Press on the display of a folder
to open it. Press the function key
The names of the currently opened folders are displayed in the title line.
– Press the function key behind the display of the title or folder you wish to
process. A pop-up window will open.
– The play function can be started and the title or folder can be copied, renamed or
erased via the pop-up window.
Function keys in the pop-up window:
- starts the play function of the selected title or folder.
Play
- stores a copy of the title or folder ⇒ page 27, "Select memory space and save
Copy
titles".
Rename - opens the input mask to change the title or folder name.
Range selector key MEDIA
twice to close the pop-up window and
MEDIA
to display the stored titles and folders on the hard
to open the appropriate higher priority folder.
27
... Name