Media Command
Using the system
Introduction to the subject
Applies to Amundsen (Does not apply to Yeti).
The Media Commandfunction allows playback of audio files or videos in up to
two TabletsThat are connected to the device via WLAN, to control the device.
The Media Command function enables operation of tablets with the operating
system Android or iOS and with the running application ŠKODA Media
Command.
Connect tablet with device
›
Turn on the device hotspot (WLAN) (press the button
surface Tap on→ WLAN → Mobile hotspot → Mobile hotspot).
›
Turn on WiFi in tablet.
›
The hotspot of the device (if necessary, enter the password for the connec-
tion setup according to the setting of the device hotspots
›
In the tablet, start the application ŠKODA Media Command.
CAUTION
If several devices are connected to the device via WLAN, there is a risk that the
quality of the WLAN connection, and thus the function of Media Command may
be affected.
Main Menu - connected to a tablet
›
to display the main menu Media Command press the button
functional surface surface.
then the functional
» page
39).
Fig. 25
Main menu: connected to a tab-
let
, then the
Main menu
» Fig. 25
Information on playing track
A
Playback timeline with a slider
B
Tablet name
C
Playback Control
D
Increase / decrease the tablet volume
Selection of the playback source
Wireless settings
Main Menu - two tablets connected
Fig. 26 Main menu: two tablets connected / use one of the two connec-
ted Tablets
›
to display the main menu Media Command press the button
functional surface surface.
›
To initiate operation of the tablet, the functional surface Tap on each tab-
let
» Fig. 26
- .
›
To return to the main menu, the functional surface Tap
Main menu
» Fig. 26
Name of the first tablets
A
Name of the second tablets
B
Playback control
C
Information on playing track
D
Playback timeline with a slider
E
Name of the tablet being operated
F
Increase / decrease the tablet volume
Selection of the playback source
, then the
on» Fig.
26- .
29
Media Command