Head Restraints - Skoda OCTAVIA - 05-2009 Owner's Manual

Retrieving settings with remote control
– If the driver door is closed and the ignition is switched off, briefly press
the unlock button of the radio remote control ⇒ page 50 and then
open the driver door.
– The seat and exterior mirrors now move automatically into the stored
positions.
Retrieving setting of exterior mirror for reversing*
– Turn the rotary knob for the exterior mirror setting into the position
⇒ page 73 before engaging the reverse gear.
The mirror returns into its initial position, after the rotary knob is moved out of the

position and put into another position or if the speed is more than 15 km/h.
Emergency Off
You can interrupt the setting operation at any time, if you operate any button of the
driver seat.
Note
If in the stored position the inclination angle of the seat backrest is more than 102°
in relation to the seat cushion, the seat backrest remains in this position, after
reaching this angle, when retrieving the setting by briefly pressing the memory
button. In order to achieve the stored setting, it is necessary to press the memory
button again and hold it pressed until the seat is in the stored position.
Using the system Safety

Driving Tips General Maintenance

Head restraints

Best protection is achieved if the top edge of the head restraint is at the
same level as the upper part of your head.
Adjusting the height of a head restraint
– Grasp the side of the head restraint with both hands and push it in
⇒ fig.
upward direction as desired
– Move the head restraint downwards if required by pressing and
holding the safety button with one hand
with the other hand the head restraint downwards.
Breakdown assistance
Seats and Stowage
Fig. 77 Adjusting head
restraint
Fig. 78 Removing a head
restraint
77.
⇒ fig. 78
and by pressing
Technical Data
79