Table of Contents
Advertisement
The following will be displayed in the information display*:
Please refuel!
An audible signal sounds as an additional warning signal.
Caution
Never run the fuel tank completely empty! The irregular supply of the fuel system
can lead to irregular running of the engine. Unburnt fuel may get into the exhaust
system and damage the catalytic converter.
Note
After filling up, it can occur that during dynamic driving (e.g. numerous curves,
braking, driving downhill and climbing a steep hill) the fuel gauge indicates approx.
a fraction less. When stopping or during less dynamic driving, the correct fuel
supply quantity is indicated. This effect is not a fault.
Counter for distance driven
The distance which you have driven with your vehicle is shown in kilometres (km).
In some countries the measuring unit "mile" is used.
Using the system
Safety
Fig. 19 Display: Counter for
distance driven
Driving Tips
General Maintenance
Instruments and Indicator/Warning Lights
Reset button
A
⇒ page 17, fig. 18
If you hold the reset button
5
trip counter is set back to zero.
Trip counter for distance driven
The trip counter indicates the distance which you have driven
counter was last reset - in steps of 100 metres or 1/10 of a mile.
Counter for distance driven
⇒ fig. 19
The counter for distance driven
or miles which the vehicle has driven.
Fault display
If there is a fault in the instrument cluster, a constant text will appear in the display
Error. Have the fault rectified as soon as possible by a specialist workshop.
WARNING
Never seek to adjust the trip counter for distance driven while driving for
safety reasons!
Note
If vehicles which are fitted with the information display* the display of the second
speed is activated in mph or km/h, this driving speed is indicated instead of the
counter for the total distance driven.
Breakdown assistance
pressed for about 1 second, the
⇒ fig. 19
since this
indicates the total distance in kilometers
Technical Data
19
Advertisement
Table of Contents
