Figure 2-6: Installing The Terminator - Freecom DLT VS-80 Installation And Operation Manual

To terminate your DLT-VS80 Internal Drive, insert an active LVD or multimode LVD/SE
terminator into the connector on one end of the supplied SCSI ribbon cable as shown in
Figure 2-6. You can use a cable-end terminator as shown in Figure 2-6 or an inline
terminator, whichever is most convenient. Continue with the rest of the installation as usual.
Terminator SCSI Ribbon Cable

Figure 2-6: Installing the Terminator

2-11